- Associations & Useful Organisations
- Bricks, Blocks & Stone
- Ceilings, Partitions & Access Floors
- DDA Compliance
- Doors, Windows & Architectural Hardware
- Drainage & Plumbing Solutions
- Fire, Safety & Security
- Floors & Floorcoverings
- Heating & Ventilation »
- Interior Environment
- Kitchens, Bathrooms & Washrooms
- Lighting & Electrics
- Modern Methods of Construction
- Paints & Finishes
- Roofing, Cladding & Insulation
- Sealants, Fixings & Adhesives
- Smart Technology, Tools & Equipment
- Stairs, Lifts & Escalators
- Sustainability & Energy Efficiency
- Urban Design & Landscaping
Single Room Underfloor Heating Pack from Robbens Systems
Robbens design and supply full house underfloor heating systems, and their one room pack, detailed as follows......
Robbens Systems has launched its Single Room Underfloor Heating Pack. The new product meets the need for a packaged system specifically designed for underfloor heating extensions and conservatories.
Two models are available - one capable of heating up to 14m2 of screeded floor and the other suitable for areas from 14 to 28m2.
Each system is based on a standard design with a maximum output performance guideline, so that a selection can be quickly made on the basis of the floor area involved.
Each Pack comprises all necessary components for efficient, easily controlled underfloor heating of the area in question. Pack contents include a programmable thermostat and controls – plus detailed installation instructions.
The Manifold, which forms the heart of the system with flow and return pipe connections and quiet running pump, is factory assembled on special mounting boards and pre-tested prior to dispatch. This ensures a compact, neat product, which can be installed and commissioned, to the layout drawings supplied with each Pack, in a fraction of the time required for other systems.
During installation loops of Robbens multi-layer pipework are fixed in position above a layer of insulation material with the loop ends connected to the manifold, which can be discreetly located in a convenient cupboard etc. The manifold is connected in turn by flow and return lines to the boiler.
After pressure testing, a normal sand and cement screed can be poured to integrate the heating system into the floor structure and provide a smooth, even surface for the final floor finish.
Robbens Single Room Underfloor Heating Packs are designed for use with solid/screed floors only and are suitable for a range of floor finishes including tiles and carpets.
When the system is in operation the concealed pipework radiates heat from across the entire floor surface, rapidly bringing the room up to the desired temperature.