1. Cosyfloor™ by demista™ Ltd

Cosyfloor™ comfort heating is a system that can be simply installed on any solid based floor, both in new build and existing areas. Beautiful but cold surfaces such as tiles, marble, natural stone and hardwood are transformed into inviting warm floors even on the coldest of days. The matting silently warms the surface of the floor to an even temperature giving a gentle, glowing warmth with the ultimate comfort. Particularly suitable for bathrooms, kitchens and similar areas having naturally cold surfaces, Cosyfloor™ gives that added touch of luxury where and when most required.

General Description.

Cosyfloor™ cable mats consist of thin profile, insulated, and earth screened cables stiched to a reinforced, open weave, glass cloth blanket. With a range of modular sizes as shown on the table. Cosyfloor™ can be fitted in multiples and can be simply laid around fixed objects making it exceptionally adaptable and suitable for most areas.

Cosyfloor™ consists of thin profile, double insulated cables which are attached to a reinforced open weave mat. An integral earth braiding complying with current electrical safety requirements and allowing use in wet areas is incorporated. The cable are positioned at the correct distance apart ensuring even heating throughout and allowing simple and quick installation. As described in the fitting instructions, the mats can be laid around fixed objects making it exceptionally adaptable and convenient for most areas.

Cosyfloor™ mats are suitable for many floor finishes including timber, laminates, tiles, slate, marble, vinyl and carpets. Care should be taken not to thermally block any part of the heated floor as this could result in localised overheating and possible damage to the surface.

The many advantages include…

Complete safety
Easy to install
Low running costs
Maintenance free
10 year warranty
Reduces condensation
Use of otherwise cold areas throughout the year

Rating:
160W/m²
Voltage:
220/240V

Running Temperature:

25º/30ºc depending upon ambient room temperature

Surface Heat Up Time:

Initial warming within 30 minutes; optimum running temperature 60/90 minutes, depending on ambient room, floor finish and level of insulation

Thickness of Cable:
3.5 mm

Connection Leads:
5 meters long – can be shortened on site to suit application.

Level of Floor:
With the inclusion of cosyfloor the flooring will be raised by approximately 5/6mm

Compliance Standard:
Double Insulated and earthed cables complying with UK wiring regulations and tested to International Standards IEC 800

Maintenance:
Requires no maintenance. In the unlikely event of accidental damage occurring during installation, or subsequently, e.g. whilst drilling the floor or replacing tiling etc, it is possible for the fault to be traced by a qualified electrician and repair in situ.

Controls:
Various controls can be supplied, as appropriate. e.g. electronic wall mounted thermostat with remote floor sensor, either with or without integral clock; wall mounted air-sensing thermostat; wall mounted, tamperproof air sensing thermostat for use in bathrooms,

Running cost
The running cost of cosyfloor™ is comparatively low. As an example, operating continuously at prime rate, and without the benefit of thermostatic control, to heat an area 4m² (640watts), the approximate cost per hour to run would be 4p.

Quotations
To receive our proposal give full details of room(s) to be heated.

Also available – ask for details
Systems for more comprehensive room heating: demista™ Heated Pads for steam free mirrors: demista™ Heated Bathroom Cabinets.

Guarantee
Cosyfloor™ is covered by a 10 year manufacturers warranty provided that it has been installed strictly in accordance with installation instructions and in accordance with all necessary electrical regulations.

« Back to the demista™ Ltd page